 |
 |
 |
 |
 |
 |
||||
SEMAC Smart Ethernet Multi-door Access Controller
Smart like SEMAC (Smart Ethernet Multi Access Controller), is able to cluster all connected access controller terminals into one access control network over TCP/IP. Additionally, SEMAC is also accessible with Web Pass IP Reader which totally achieves data, resources sharing. Moreover, every single SAMEC, can be working independently with or without PC connection: when we connect SEMAC with PC, system data will be seamlessly integrated thru Management Software, provides a totally Real-Time monitoring environment, and in the other hand, when system is under off-line status will efficiently keep user's punching records and data to the system automatically. With Chiyu's SEMAC solution, would totally free IT mangers from the time-consumed maintenance job load.
• |
Site Security and Access Control |
• |
Single door/Bidirectional, or Dual doors/ Single directional access mode provided. |
• |
Up to 8 doors per SEMAC are accessible with additional BF-50 relay box. |
• |
Apart from Exit Button will be up for emergency status, up to 50 card numbers will be reserved for last |
| 50 particular persons whose card have once access the doors for emergency door-release purpose | |
| while device disconnected with SEMAC. | |
• |
Built-In HTTP server, provides user friendly Web management interface. |
• |
Free Management Software package included. |
• |
Capacity for card-holder can be option: 20,000users/60,000 events, or 100,000users/120,000 events. |
• |
12 sets for door release Time Zone authentication provided. |
• |
3 PIN codes ( Admin/User/Common) and 5 Cards( authentication modes provided. |
• |
All Wiegand 26/34 Readers are compatible. |
• |
Door Release time interval can be set based on site requirement : 1 ~ 60000Sec. |
• |
255 Time Sets, 120 Time Zones (8 days per set and 16 Time Set per day), 255 Groups (8 doors), |
| 100 Holidays can be organized. | |
• |
Each card holder can be assigned to 4 different groups. |
• |
Double-Badge, Anti Pass Back and Anti-Duress design to higher the access security base. |
• |
On-Line system upgrade, ease the maintenance job loading. |
• |
System alert will be sending immediately by E-Mail. |
• |
Diverse Door-release modes provided: Multi-Cards Release (2~3 persons per set, up to 10sets), or |
| Remote-Release, or Prima Card-Release. | |
• |
Built-In Watch Dog hardware protection design in case of system crashed. |
• |
Protective ESD/Surge circuit design, secure system lifetime and communication quality. |
• |
External Guard Tour and Security devices supported. |
• |
IP Camera is supported |
• |
Interlocking supported under multi doors access control environment. |
• |
Ships with dry connectors for various kind of external alarm devices. |
• |
Controllers and the controller box can ship with Tamper Switch in case of any illegal break-ins and |
| intentionally break-downs. | |
• |
Suitable for large premises, factories, buildings, parking lots, elevator control requirement, school...etc. |
• |
Emergency Door-Release: Door can be released from remote site, or by pressing the Emergency |
| Exit Button under emergency situation. |
• |
Communication with management software: TCP/IP |
• |
Communication with BF-50: RS-485 |
• |
Reader support: 2 wiegand readers ( thru Rj45) |
• |
Door Sensor (Input): 2 ( Circuit Short, Self-Diagnostic support) |
• |
Exit Button (Input): 2 ( Circuit Short, Self-Diagnostic support) |
• |
Dry Connector (Input): 2 ( Circuit Short, Self-Diagnostic support) |
• |
EM Lock (Output): 2 ( 5A/30V，Always ON，Always OFF) |
• |
Dry Connector (Output): 2( 5A/30V，Always ON，Always OFF) |
• |
Default Reset Button: One |
• |
Power requirement: 9 ~ 24VDC/1A |
• |
Dimension: 143 x 93(113) x 17 mm, (113mm with terminal connector) |
• |
LED Indicators: |
| - 1 Green LED for system connection status (externally) | |
| - 1 Red LED for power connection status | |
| - 1 for Reader status | |
| - 1 for Error status | |
| - 2 for communication (TX, RX) indicators | |
| - 4 for Relay indicators |
Model |
Type |
SEMAC |
S1: Not expandable |
S2: Up to 8 doors/16 external Wiegand readers support with option BF-50. |
• |
How to choose a model ? |
| For example: SEMAC-S1 or SEMAC-S2 |
Model |
Description |
| SEMAC-3A1 | SEMAC-S1, 3A Power supply, Controller box & Battery (Optional） |
| SEMAC-3A2 | SEMAC-S2, 3A Power supply, Controller box & Battery (Optional） |
| CASE-SEMAC-00 | Controller box, 3A Power supply |
| POW-00-SEMAC-1203 | 3A Power supply |
• |
BF-50 is required for Door no. 2 when we deploy two Wiegand readers on the same Door no. 1 |
| Type 1 | |
 |
|
| Type 2 | |
 |
|
• |
Elevator Controller |
 |
• |
Controller box |
• |
Power supply |
• |
7Ah Battery |
• |
Card Encoder/Decoder |
• |
WG Reader |
• |
BF-50: Relay Box |
• |
|
• |
Power adaptor |
• |
Push button |
• |
Door Lock |
