AC input voltage: 100 ¡V 240 Vac ¡Ó 10 ¢M full range
AC input frequency: 47Hz~63Hz
AC input current: 0.3A (MAX.)
Max. inrush current: 60A maximum (for 230Vac) , 30A maximum (for 110Vac) (at cold start)
Leakage current: maximum 0.75 mA
Efficiency: 70% typical at full load (Minimum)
No load power consumption <0.5W
Output Voltage
Static Output
OUTPUT VOLTAGE: +12V
LOAD MIN: 0.0A
LOAD MAX: 1.0A
TOLERANCE REGULATION: 11.4V~12.6V
RIPPLE & NOISE: 140mV
Note: Ripple & noise is measured at max. load AC input 110Vac condition with a 20MHz bandwidth limited scope and 0.47uF cap.with 10uf cap. parallel with load
Hold up time: 16ms after loss of nominal AC input under full load condition
Protection type
Short circuit protection: automatic recovery
Dielectric withstand(hi-pot) test
Primary to Secondary: 3000Vac, 2sec between Input to Output
Insulation Resistance: at 500Vdc, IR shall>=500Mohm
Safety standards
EMI requirement:
MEET CCE / FCC / BSMI CLASS B
ESD : EN6 1000-4-2 (1995) ¡B IEC801-2(1991)
Surge: EN6 1000-4-5 (1995)
Referring Standards
UL/CUL 60950
TUV/GS EN60950
CB IEC60950
PSE J60950
3C C60950
M.T.B.F.
70000 hours Min; 25 ¢J under full load condition Environment
Environment
Operating temperature: 0 ¢J to 40 ¢J
Humidity: 20% to 80% RH
Storage temperature: -20 ¢J to 70 ¢J
Storage humidity: 10% to 90% RH
Mechanical
Plastic Case: Case with UL material
Physical Size:50(L)*40(W)*28.5(H)mm
DC Output Jack Size: 5.5*2.1*11.5 I type
Output Cable with UL2468,20AWG wires and DC jack plug
